Hi Jochen,
I installed them from a repository, that was until recently available at
https://home.der-he.de/packages/
(see http://lists.kolab.org/pipermail/devel/2014-March/014959.html)
Unfortunately it is not available anymore. I put the creator in CC,
maybe we could find a new location for this repo (maybe even somewhere
on the kolabsys-servers, Torsten?).
On my rpi3 kolab runs smoothly, except webmail, which is a bit slow
(although on nginx). The only error I had to circumvent was the
dirsrv-admin package, which I had to install from the ubuntu buster
repository (see below).
Best,
Henning
-------- Forwarded Message --------
Subject: Re: Raspberry Pi kolab repo
Date: Sat, 21 Apr 2018 23:24:13 +0200
From: Peter Pan <***@powdermail.com>
To: hede <***@der-he.de>
Dankeschön. Ich habe um das Problem zu beheben das Paket aus dem buster
repository installiert.
Mit einer /etc/apt/sources.list
# debian stretch
deb http://raspbian.raspberrypi.org/raspbian/ stretch main contrib
non-free rpi
# [snapshot] Kolab Winterfell packages for debian stretch armhf: kolab
Winterfell 171201
deb http://packages.der-he.de/packages/debian/kolab/winterfell-171201
stretch main
# 389-admin package, because of bug in stretch-version
deb http://ftp.de.debian.org/debian buster main
/etc/apt/preferences
# kolab repository packages
Package: *
Pin: origin packages.der-he.de
Pin-Priority: 700
# default repository
Package: *
Pin: release n=stretch
Pin-Priority: 650
# only used for certain packages, which are installed manually
# 389-admin
Package: *
Pin: release n=buster
Pin-Priority: 600
und dann mittels
sudo apt-get install kolab 389-admin/buster
roundcubemail ist relativ langsam auf dem rpi3, aber da hänge ich
sowieso nicht dran (wer braucht webmail?)
Viele Grüße
Henning
# dpkg -s 389-admin
Package: 389-admin
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 1097
Maintainer: Debian 389ds Team
Architecture: armhf
Source: 389-admin (1.1.43-1)
Version: 1.1.43-1+b1
Depends: 389-ds-base, apache2, libapache2-mod-nss, libcgi-pm-perl,
libds-admin-serv0 (= 1.1.43-1+b1), libmozilla-ldap-perl, libnss3-tools,
init-system-helpers (>= 1.18~), libadminutil0 (>= 1.1.21), libc6 (>=
2.7), libldap-2.4-2 (>= 2.4.39), libnspr4 (>= 2:4.10.9), libnss3 (>=
2:3.13.4-2~)
Pre-Depends: debconf (>= 0.5) | debconf-2.0
/etc/default/dirsrv-admin 1e9743a3a8570668c484c85f9a99628e
/etc/dirsrv/admin-serv/admserv.conf 899baccd5e5ebf8d922796ee1b9c0a95
/etc/dirsrv/admin-serv/console.conf c7acba435bd38433f2151c198ba3ba62
/etc/dirsrv/admin-serv/httpd.conf e3ab23c7bed37487c6fbb717b85dd4fe
/etc/dirsrv/admin-serv/nss.conf 25081836ae840b4fdf5f577526411264
/etc/init.d/dirsrv-admin cd5841a49c3d1549cd07cfca755546b8
Description: 389 Directory Administration Server
389 Directory Administration Server is an HTTP agent that provides
management features for 389 Directory Server. It provides some
management web apps that can be used through a web browser. It provides
the authentication, access control, and CGI utilities used by the
console.
Homepage: http://directory.fedoraproject.org
Am Tue, 17 Apr 2018 16:33:11 +0200 schrieb PeterPan
Dankeschön. Könntest du mal nachschauen welche Version von dem Paket du
installiert hast?
Viele Grüße
Henning
Hi,
nice to hear this. do you just run something like yum install kolab
(...probably apt-get install kolab...) or how did you get kolab running
on a pi?
Regards
Jochen